Home > Products > >
MTLD Electromagnetic flowmeter
MTLD Electromagnetic flowmeter MTLD Electromagnetic flowmeter
Name: MTLD Electromagnetic flowmeter
Available in flange and wafer style
PTFE and Neoprene Liners
Line sizes available from 1/2-in. (15 mm) to 48-in. (1200mm).

No moving parts; Virtually no pressure drop;
Minimal maintenance
Wide range of nominal diameters;
Broad selection of lining and electrode materials


Power Supply 110-240Vac (Optional: 24 Vdc)
Power Consumption 10W
± 0.5% accuracy of rate from 0.3-10 m/s
± 1.0% accuracy of rate from 0.1-0.3 m/s
Repeatability 0.2%
Minimum Fluid Conductivity 5.0 micromhos/cm
Flow Direction Unidirectional or bidirectional, 2 separate totalizers (programmable)
Analog Output 4-20mA, 750ohms Max Load
Output Frequency
Scaled Pulse output,
(open collector) Max 5Khz
Noise Damping Programmable
Pulse Width Programmable up to 500ms
Zero-point Stability Automatic correction
Ambient Temperature -4 to 140° F (-20 to 60° C)
Electrode Materials
Optional: Titanium; Hastelloy Alloy C; Tantalum
Liner Material PTFE, FEP, Hard Rubber
Fluid Temperature
PTFE: 120°C Standard (Customized: 180°C)
Rubber: 60°C
Pressure Limits 1.0 Mpa; Optional 1.6; 2.5; 4.0 Mpa
Coil Power Pulsed DC
Pipe Spool Material SS316
Meter Housing Material Carbon Steel welded or SS304 (Sanitary Connection)
Carbon Steel - Standard (ISO 7005-1)
ANSI, DIN and JIS Flange Connections
Optional Stainless Steel Grounding Rings

Mounting Positions

Required Lengths of Straight Runs